Recall 00E019000: Suspension, Front, Hub

NHTSA recall 00E019000 · announced April 10, 2000 · Consolidated Metco · 2,400 units affected

The problem

EQUIPMENT DESCRIPTION: THE OUTBOARD BEARING ON THE PREGREASED TRAILER AXLE HUBS USED WITH THE TIRE INFLATION SYSTEMS MAY FAIL DUE TO THE INTRUSION OF CONTAMINANTS THROUGH THE TIRE INFLATION SYSTEM.

The risk

AN OUTBOARD BEARING FAILURE CAN RESULT IN A SEPARATION OF THE HUB ASSEMBLY FROM THE SPINDLE.

What to do

AUTHORIZED DEALERS ARE INSTRUCTED TO CONVERT GREASED HUBS TO OIL HUBS IF THE TIRE INFLATION SYSTEM IS TO REMAIN ON THE TRAILER. IF THE TIRE INFLATION SYSTEM IS REMOVED, THE HUB MUST BE INSPECTED FOR CONTAMINATION AND CORROSION. THE HUB AND BEARING ASSEMBLY MUST BE REPLACED IF THERE IS EVIDENCE OF CORROSION. IF THERE IS NO EVIDENCE OF CORROSION, LUBRICANT AND SEAL MANITENANCE CAN BE PERFORMED AND THE HUB REINSTALLED.

Official NHTSA recall notice →

Notes

OWNER NOTIFICATION BEGAN MAY 16, 2000.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CONSOLIDATED METCO AT 1-800-425-4827.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

Source: National Highway Traffic Safety Administration public recall data. This page reports official records and is not legal, medical, or repair advice.